Audio-Technica AT-VM95E

  Este cartucho da série VM95 com caneta elíptica de 0,3 x 0,7 mil se encaixa em plataformas giratórias de meia polegad... AT-VM95E VM95 series Elliptical stereo cartridge The AT-VM95E, the new Audio-Technica entry model Elliptical cartridge will replace the legendary AT95E and take advantage of the developments of the AT95EX introduced in 2015. The AT-VM95E features an improved and distinctive design resulting in a more rigid low resonance housing, and two threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an integral tonearm with just two screws, no nuts. Aluminium cantilever4.0mV output voltageCompatible body with all VM95 Series stylus assembliesReplacement for AT95E and AT95EX20 to 22,000Hz frequency response Model AT-VM95E Type VM Stereo Dual Magnet Mounting 1/2” centres Frequency Response 20 - 22,000 Hz Channel Separation 20 dB (1 kHz) Output Channel Balance 2.0 dB (1 kHz) Output Voltage 4.0 mV (@ 1 kHz, 5 cm/sec) Vertical Tracking Angle 23° Vertical Tracking Force Range 1.8 - 2.2g (standard 2.0 g) Stylus Shape Elliptical Stylus Size 0.3 x 0.7 mil Stylus Construction Bonded Round Shank Cantilever Aluminium Pipe Coil Impedance 3.3 kΩ (1 kHz) Coil Inductance 550 mH (1 kHz) DC Resistance 485 Ω Static Compliance 17 x 10 – 6 cm / dyne Dynamic Compliance 7 x 10 – 6 cm / dyne (100 Hz) Wire Used for Coil T.P. Copper Recommended Load Impedance 47,000 Ω Recommended Load Capacitance 100-200 pF Cartridge Weight 6.1g Dimensions 17.2 x 18.9 x 28.3 ( H x W x D mm) Replacement Stylus AT-VMN95E Accessories Included Two 11 mm installation screws; Two 8 mm installation screws; Two washers