Holdpeak HP-90F Digital Network Multimeter Meter With Telephone Line And Network Cable Test Digital

Multimeter with LAN Cabo RJ11 Testador para RJ45

Multimeter with automatic display backlight, voltagem, corrente, resistance, battery teste, diode / continuity teste, cabo teste RJ11 / RJ45



To read the measurement in dark places, the green display backlight turns on automatically.

During the battery teste, the voltage is measured with low input resistance and displayed (see Technical data in detail - test battery).

When testing telephone cabos RJ11 function is checked and displayed accordingly. The test network cabos RJ45 is extensive, here is checked for short circuit, franquia and break.

Display: LCD to 1999, digit height cerca de 16mm, with automatic lighting
A value measurement hold function
Automatic zeroing
Automatic polarity indication
Display if the measured value is out of range
Indicator for low power
Battery saver: automatic shutdown with previous beep
Safety: Complies with EN61010-1, Overvoltage Categoria III 1000V, Pollution Degree 2
measurement capabilities
DC: 200mV, 2V, 20V, 200V, 1000V
AC: 2V, 20V, 200V, 750V, frequency range 40Hz-400Hz
DC: 200µA, 2mA, 20mA, 200mA, 10A
AC: 2mA, 20mA, 200mA, 10A
Resistance: 200Ω, 2kΩ, 20kΩ, 200kΩ, 2MΩ, 20MΩ, 200MΩ
Transistor hFE teste
Diode Teste
Continuity Teste acoustically
Permite que a aplicação teste 1.5 V, 6V, 9V
Cabo Teste RJ45 and RJ11
Technical specifications
Product: DMM HP 90F
Power supply: bateria 9V
Operating environment: 0-40 ° C, relative humidity ≤85% RH
Storage environment: -10-50 ° C, relative humidity ≤85% RH
Accuracy surroundings: 18-28 ° C, relative humidity ≤70% RH
Dimensions (WxHxL): 88 x 51 x 180mm with rubber protection
Weight: about 390g with rubber protection and battery
The two, indicated in the following table in the measurement uncertainty column values are as ± (% of the total indicator reading + fixed deviation) to understand.