Draytek Vigor2133 - DT-V2133Vac

LAN Port :1x 10/100/1000M Base-T, RJ-45, supports 802.3af PoE -Antenna :2x Internal Dual-Band PiFA Antenna -Gain: 5 dBi for 5GHz, 3 dBi for 2.4GHz -DC Power Jack 1 -Factory Reset Button : 1 -Security Lock :1Capacity: 2.4GHz Peak Speed 300 Mbps - 5GHz Peak Speed 867 MbpsMax. Number of Concurrent Active Clients : 256 (128 per radio band) -WLAN 2.4GHz Standard IEEE 802.11b/g/n 2x2 MIMO -5GHz Standard IEEE 802.11a/n/ac wave 2 2x2 MU-MIMOOperating Mode :AP, Mesh Root, Mesh Node, Range Extender -Roaming :AP-Assisted Roaming, PMK-Caching, Pre-Authentication -AirTime Fairness - Band Steering - Auto Channel Selection -Max. Number of SSID : 8 (4 per radio band) -WDS -Bandwidth Limit per Client - Client Number Limit : Per radio, Per SSID -Connection Time Control -WMM - Security -Security Mode : WEP, WPA, WPA2, WPA3-Personal, Mixed(WPA+WPA2) -Authentication : Pre-Shared Key, 802.1X -WPS PIN, PBC -Hidden SSIDs -MAC Address Filter: Up to 256 entries -Wireless Client Isolation -Mobile Device Management -Application -Built-in RADIUS Server -RADIUS Proxy PEAP, EAP-TLS -DHCP DHCP Server, DHCP, Client, DHCP Relay Agent - Static IP - MAC Clone 802.1q VLAN -Schedule : Auto-Reboot, Wi-Fi Up/Down, LED On/Off -ManagementLocal Service :HTTP, HTTPS, Telnet -Configuration :Stand Alone, TR-069 (VigorACS), VigorRouter APM, VigorAP Mesh Root -Firmware Upgrade : HTTP, TFTP, TR-069 -Tools Speed Test, AP Discovery, Statistics, DHCP Table, Interference Monitor -Configuration Backup and Restore -Notification Alert : E-mailSNMP v2, v2c, v3 -Syslog -Managed by VigorConnect -PhysicalEnvironment :IndoorMounting : Ceiling Mount / Wall MountPower Method : DC 12V @1A / 802.3af PoEMax. Power Consumption : 10 wattsDimension : 176mm x 176mm x 30mmWeight: 307 gOperating Temperature : 0 to 45°CStorage Temperature : -20 to 60°COperating Humidity : 10 to 90% non-condensing